Shingle Tabs

Shingle tabs are used to attach the stringers to the peaks of the home. These clips should not be used in situations where they will point towards the ground as gravity will pull them away from the home. Use gutter clips instead.

Step-by-Step Instructions

1. Align the clip, cord, and bulb together.
2. Place the C9 bulb through the top hole. C7 bulbs use the bottom hole.
3. Screw the bulb into the socket. The Shingle clip is clamped between the bulb and the socket.
4. The attached clip and bulb.

Attaching to the Home

Slide the clip between the shingles on the peaks of the home. Try to avoid sliding underneath all the shingles as the bottom of the clip will be exposed and causes an eyesore.